Skip to content
Sunburst electric guitar with a glossy finish

Guitar Finish Repair & Touch-Ups in Redding, CA

Chips, dings, cracks, scratches, buffing, touch-ups, and full or partial refinishes.

Finish damage is mostly cosmetic, but chips and cracks can spread and let moisture into the wood. We fill chips and dings, steam out dents, stabilize cracks and checking, and polish out scratches and swirls so the guitar looks cared for again.

For a bigger change, we do partial and full refinishes, strip old finishes, convert to a natural oil finish, and apply decals. If you want a played-in look, we can do a relic job too.

Small touch-ups are quick. Refinishes and larger work are quoted after a look so you know what to expect. Bring it in to the shop on Redcliff Drive and we’ll go over the options.

Finish services

18 services. Don't see your problem? Call or text, we probably fix it.

Body finish touch-up

Touch up worn or damaged spots in the finish so they look better and the wood stays protected.

Sounds like: finish worn off, touch up paint, bare wood showing, finish damage

Full details

Drop fill

Fill chips and gouges with clear or colored finish, level it, and polish so the spot blends in.

Sounds like: fill a chip, deep ding, gouge in finish, drop fill

Chip repair

Fill and level finish chips so they stop spreading and catch less light.

Sounds like: finish chipped, paint chip, chip on edge, chipped headstock

Full details

Ding repair

Fix dings and small impact marks in the finish so they're far less noticeable.

Sounds like: dinged guitar, dent in finish, bumped my guitar, small ding

Dent steaming

Raise compressed wood in a dent with steam, then touch up the finish over it.

Sounds like: dent in body, pressed dent, steam out dent, dented wood

Finish crack repair

Stabilize and fill cracks in the finish so they don't lift or chip further.

Sounds like: finish cracking, crack in paint, finish lifting, clear coat cracked

Finish checking repair

Treat finish checking lines so they stop spreading and the finish stays sound. Quoted after a look.

Sounds like: finish checking, lacquer checking, lines in finish, weather checking

Buffing

Machine buff the finish to bring back shine and smooth out light wear.

Sounds like: dull finish, bring back shine, buff guitar, hazy finish

Polishing

Polish the finish to clean up haze, fingerprints, and light marks.

Sounds like: polish guitar, shine up finish, cloudy finish, fingerprints won't come off

Full details

Scratch removal

Sand and polish out surface scratches in the clear coat so the finish looks clean again.

Sounds like: scratches on guitar, scratched finish, belt buckle scratches, pick scratches

Swirl removal

Polish out swirl marks left from rough cleaning or wiping with the wrong cloth.

Sounds like: swirl marks, swirls in finish, polishing marks, circles in clear coat

Clear coat refresh

Lightly level and recoat worn clear coat so the finish is protected and even. Quoted after a look.

Sounds like: clear coat worn, clear coat thin, recoat guitar, clear wearing through

Full refinish

Strip and refinish the whole body or neck in a new or matching finish. Quoted after a look.

Sounds like: refinish guitar, repaint guitar, new color, full refinish

Partial refinish

Refinish one area, like a worn edge or damaged section, without redoing the whole guitar. Quoted after a look.

Sounds like: refinish one spot, partial respray, fix worn area, refinish edge

Relic job

Add realistic wear to the finish and hardware for a played-in look. Quoted after a look.

Sounds like: relic my guitar, aged finish, road worn look, relic job

Stripping finish

Remove the old finish down to bare wood so it can be refinished or oiled. Quoted after a look.

Sounds like: strip paint, remove finish, strip guitar body, take finish off

Natural oil finish conversion

Remove the existing finish and switch to a hand-rubbed oil finish for a natural feel. Quoted after a look.

Sounds like: oil finish, tru oil, natural wood finish, remove gloss for oil

Decal application

Apply a headstock or body decal and clear over it so it stays put.

Sounds like: headstock decal, apply decal, logo decal, waterslide decal